Jenn Air Refrigerator Control Panel Not Working. Hold power freeze and vacation. If cleaning the door gasket shows no results, test the seal.
JF42NXFXDE JennAir 42" BuiltIn French Door Refrigerator Panel Ready from www.designerappliances.com
I've never worked on a fridge before and am hoping someone might be able. To make the refrigerator less cold, adjust the control to the next lower. Actually, the fridge and freezer are both on and working.
Grasp Control Panel On The Far Left And Right Sides And Gently Pull The Control Panel Out And Down.
They have been working with the default settings (38 deg. Hold power freeze and vacation. If you need to adjust the temperature, wait at least 24 hours between adjustments and then recheck the temperature.
This Occurs When The Doors Are Opened With No Interaction With The Control Panel Or Two Minutes After The Last Selection Was Made.
Hold energy saving and lighting. Hold energy save and lighting. The only thing that would cause the touch control panel to fail a second time is the display board since that is what the touchpad plugs into.
Here's How You Take It Apart:
Pull out the grille panel until it stops. In this article, we discuss how to troubleshoot jenn air refrigerator problems. The lights are on, and the lcd panels displays the temperature but you can't do anything on the panel.
Remove Burner Switch Control Knobs.
If you’re not sure how to work the settings, read the instruction manual. The main control board turns on and off various components of the refrigerator such as the compressor, defrost system, thermal. Finally, lift it to remove it from the fridge.
To Make The Refrigerator Colder, Adjust The Control To The Next Higher Setting.
French door bottom freezer refrigerator. Check if the door seals are damaged. Remove screws located on the left and right sides of the control panel.
Location:
Share :
Post a Comment
for "Jenn Air Refrigerator Control Panel Not Working"
Post a Comment for "Jenn Air Refrigerator Control Panel Not Working"